1.      Please cheek the quality of each camera. For that connect directly each coaxial cable to the monitor BNC Video IN and check the picture.

2.      Connect each coaxial cable owing form the 4 cameras to the concerning BNC Rec:6.

3.      Connect the Video signal OUT. You have 2Possibilities and the connection depends of your installation.
You have 2 Video signals OUT:
QUAD ONLY    BNC Rep: 4
SELECT           BNC Rep: 5
Please cheek the # HOW TO OPERATE

4.   For the adjustment of the Video signal Gain Rep: 7 connect the monitor to the RNC Rep: 5 and adjust the corresponding VR. G1 TO G4. Rep: 7

HOW TO OPERATE:

If you connect the receiver at the BNC Video OUT QUAD ONLY. Rep: 5 you have the 4 cameras in screen or recorded. In this configuration, the front panel is locked and if you push any push button you keep the mode QUAD. This configuration is used when you want keep the full control of your installation. Usually we connect a VCR.

If you connect the receiver at the BNC Video OUT SWITCH. Rep: 4, the Video signals change with the selection on the front panel. If you select QUAD. Rep: 1, you have in the BNC Rep:5, the 4 cameras in screen, each picture if you select QUAD. Rep: 1, you have in the BNC Rep: 5, the 4 cameras in screen. Each picture in quarter screen.

If you select SWITCH. Rep: 2, you have in the BNC Rep: 4 the 4 cameras in Auto scan mode with timing 4 sec.

If you select 1 of 4cameras FULL screen. Rep: 3, you have in serene, the camera selected in FULL screen mode.

If you want to change the mode you should be push the button your selection. The LED indicates the position selected.

TYPE

B/W QUAD

Picture Refresh Rate

CCIR: 25 Fields/Sec, EIA: 30 Fields/Sec

Digital Memory

1024×512 for Full screen

Hor. Resolution

700 Pixels mini for Full screen

Digital Quantity

8 bits(256 Setups gray scale)

Video Format

EIA or CCIR Monochrome video signal

Video Input

4 BNC connector

1.0Vp-p adjustable par “VR”, 75ohms

Video Output

QUAD

SWITCH

2 BNC connector

1.0Vp-p QUAD video output, 75ohms

1.0Vp-p Full screen or Quad, 75ohms

Auto Scan Timing

4 Sec

Alarm

NO

Power Supply

12VDC(9V-20V)or 12VAC(10V-15V)

Consumption

200Ma/12VDC

Operation Temp

-10~50℃, 104℉

Dimensions

210mm(L) ×220m(W) ×44mm(H)

Weight

1400g

Color Case

Cool Grey